UNITED STATES PATENT AND TRADEMARK OFFICE
`
`
`
`UNITED STATES DEPARTMENT OF COMMERCE
`United States Patent and Trademark Office
`Address: COMMISSIONER FOR PATENTS
`PO. Box 1450
`Alexandria, Virginia 2231371450
`www.uspto.gov
`
`15/046,933
`
`02/18/2016
`
`JUNJI SATO
`
`731156.526
`
`3330
`
`Seed IP Law Group LLP/Panason1e
`701 Fifth Avenue, Suite 5400
`Seattle, WA 98104
`
`WINDRICH‘ MARCUS E
`
`ART UNIT
`
`3646
`
`PAPER NUMBER
`
`NOTIFICATION DATE
`
`DELIVERY MODE
`
`08/23/2018
`
`ELECTRONIC
`
`Please find below and/or attached an Office communication concerning this application or proceeding.
`
`The time period for reply, if any, is set in the attached communication.
`
`Notice of the Office communication was sent electronically on above—indicated "Notification Date" to the
`
`following e—mail address(es):
`US PTOeACtion @ SeedIP .Com
`
`pairlinkdktg @ seedip .eom
`
`PTOL-90A (Rev. 04/07)
`
`

`

`Off/09 A0170” Summary
`
`Application No.
`15/046,933
`Examiner
`MARCUS E WINDRICH
`
`Applicant(s)
`SATO et al.
`Art Unit
`3646
`
`AIA Status
`Yes
`
`- The MAILING DA TE of this communication appears on the cover sheet wit/7 the correspondence address -
`Period for Reply
`
`A SHORTENED STATUTORY PERIOD FOR REPLY IS SET TO EXPIRE g MONTHS FROM THE MAILING
`DATE OF THIS COMMUNICATION.
`Extensions of time may be available under the provisions of 37 CFR 1.136(a). In no event, however, may a reply be timely filed
`after SIX (6) MONTHS from the mailing date of this communication.
`|f NO period for reply is specified above, the maximum statutory period will apply and will expire SIX (6) MONTHS from the mailing date of this communication.
`-
`- Failure to reply within the set or extended period for reply will, by statute, cause the application to become ABANDONED (35 U.S.C. § 133).
`Any reply received by the Office later than three months after the mailing date of this communication, even if timely filed, may reduce any
`earned patent term adjustment. See 37 CFR 1.704(b).
`
`Status
`
`1)[:] Responsive to communication(s) filed on
`[:1 A declaration(s)/affidavit(s) under 37 CFR 1.130(b) was/were filed on
`
`2a)D This action is FINAL.
`
`2b)
`
`This action is non-final.
`
`3)C] An election was made by the applicant in response to a restriction requirement set forth during the interview on
`; the restriction requirement and election have been incorporated into this action.
`
`4):] Since this application is in condition for allowance except for formal matters, prosecution as to the merits is
`closed in accordance with the practice under Expat/7e Quay/e, 1935 CD. 11, 453 O.G. 213.
`
`Disposition of Claims*
`5)
`Claim(s)
`
`1—12 is/are pending in the application.
`
`5a) Of the above claim(s)
`
`is/are withdrawn from consideration.
`
`[:1 Claim(s)
`
`is/are allowed.
`
`Claim(s) fl is/are rejected.
`
`[j Claim(s) _ is/are objected to.
`
`) ) ) )
`
`6 7
`
`8
`
`
`
`are subject to restriction and/or election requirement
`C] Claim(s)
`9
`* If any claims have been determined aflowabte. you may be eligible to benefit from the Patent Prosecution Highway program at a
`
`participating intellectual property office for the corresponding application. For more information, please see
`
`httpfiwww.usptogovlpatentslinit_events[pph[index.'§p or send an inquiry to PPeredhagk@usptg.ggv.
`
`Application Papers
`
`10):] The specification is objected to by the Examiner.
`
`11). The drawing(s) filed on 2—18—2016 is/are: a). accepted or b)C] objected to by the Examiner.
`Applicant may not request that any objection to the drawing(s) be held in abeyance. See 37 CFR 1.85(a).
`Replacement drawing sheet(s) including the correction is required if the drawing(s) is objected to. See 37 CFR 1.121 (d).
`
`Priority under 35 U.S.C. § 119
`12). Acknowledgment is made of a claim for foreign priority under 35 U.S.C. § 119(a)-(d) or (f).
`Certified copies:
`
`a). All
`
`b)I:J Some”
`
`c)C] None of the:
`
`1..
`
`Certified copies of the priority documents have been received.
`
`2.[:]
`
`Certified copies of the priority documents have been received in Application No.
`
`3.[:] Copies of the certified copies of the priority documents have been received in this National Stage
`application from the International Bureau (PCT Rule 17.2(a)).
`
`** See the attached detailed Office action for a list of the certified copies not received.
`
`Attachment(s)
`
`1)
`
`Notice of References Cited (PTO-892)
`
`Information Disclosure Statement(s) (PTO/SB/08a and/or PTO/SB/08b)
`2)
`Paper No(s)/Mail Date_
`U.S. Patent and Trademark Office
`
`3) C] Interview Summary (PTO-413)
`Paper No(s)/Mail Date
`4) CI Other-
`
`PTOL-326 (Rev. 11-13)
`
`Office Action Summary
`
`Part of Paper No./Mai| Date 20180814
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 2
`
`DETAILED ACTION
`
`Notice of Pre-AIA or AIA Status
`
`1.
`
`The present application, filed on or after March 16, 2013, is being examined
`
`under the first inventor to file provisions of the AIA.
`
`Information Disclosure Statement
`
`2.
`
`The information disclosure statement (IDS) submitted on 21 8-201 6 is being
`
`considered by the examiner.
`
`Claim Objections
`
`3.
`
`Claim 10 is objected to because of the following informalities: The word “fourth”
`
`is misspelled. Appropriate correction is required.
`
`Examiner’s Note: For applicant’s benefit portions of the cited reference(s) have
`
`been cited to aid in the review of the rejection(s). While every attempt has been made to
`
`be thorough and consistent within the rejection it is noted that the PRIOR ART MUST
`
`BE CONSIDERED IN ITS ENTIRETY, INCLUDING DISCLOSURES THAT TEACH
`
`AWAY FROM THE CLAIMS. See MPEP 2141.02 VI.
`
`Claim Rejections - 35 USC § 103
`
`4.
`
`In the event the determination of the status of the application as subject to AIA 35
`
`USC. 102 and 103 (or as subject to pre-AIA 35 USC. 102 and 103) is incorrect, any
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 3
`
`correction of the statutory basis for the rejection will not be considered a new ground of
`
`rejection if the prior art relied upon, and the rationale supporting the rejection, would be
`
`the same under either status.
`
`5.
`
`The following is a quotation of 35 U.S.C. 103 which forms the basis for all
`
`obviousness rejections set forth in this Office action:
`
`A patent for a claimed invention may not be obtained, notwithstanding that the claimed
`invention is not identically disclosed as set forth in section 102, if the differences between the
`claimed invention and the prior art are such that the claimed invention as a whole would have
`been obvious before the effective filing date of the claimed invention to a person having
`ordinary skill in the art to which the claimed invention pertains. Patentability shall not be
`negated by the manner in which the invention was made.
`
`6.
`
`The factual inquiries set forth in Graham v. John Deere Co., 383 U.S. 1, 148
`
`USPQ 459 (1966), that are applied for establishing a background for determining
`
`obviousness under 35 U.S.C. 103 are summarized as follows:
`
`1. Determining the scope and contents of the prior art.
`
`2. Ascertaining the differences between the prior art and the claims at issue.
`
`3. Resolving the level of ordinary skill in the pertinent art.
`
`4. Considering objective evidence present in the application indicating
`
`obviousness or nonobviousness.
`
`7.
`
`Claims 1-12 is/are rejected under 35 U.S.C. 103 as being unpatentable over
`
`Beer, et. al., U.S. Patent Application Publication Number 2014/0110841, published April
`
`24, 2014 in view of Margomenos, U.S. Patent Number 8,022,861, published September
`
`20, 2011.
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 4
`
`As per claim 1, Beer discloses an antenna-integrated module comprising:
`
`one or more semiconductor chips each having a silicon substrate, a metal layer
`
`stacked on a first surface of the silicon substrate (Beer, 1185-86 showing a chip on a
`
`silicon substrate with a metal layer);
`
`an insulating layer that surrounds the one or more semiconductor chips (Beer,
`
`1195);
`
`a re-distribution layer that is stacked on a first surface of the insulating layer and
`
`on a first surface of the metal layer (Beer, 1194 and 97);
`
`one or more first antenna elements that are provided on the first surface of the
`
`metal layer with a first conductor pattern (Beer, 1143);
`
`and one or more second antenna elements that are provided with a second
`
`conductor pattern on a first surface of the re-distribution layer stacked on the first
`
`surface of the insulating layer (Beer, 1122 showing the second antenna on another
`
`layen.
`
`Beer does not expressly disclose the second antenna being on the same layer
`
`but does disclose an antenna on the re-distribution layer (1152).
`
`It would have been
`
`obvious to a person of ordinary skill in the art at the time of the invention to place the
`
`second antenna on the re-distribution layer as it has been held that rearranging parts of
`
`an invention involves only routine skill in the art.
`
`In re Japikse, 86 USPQ 70.
`
`Beer is silent in regards to frequency converters within the module.
`
`Margomenos teaches an antenna module with frequency converters (Col. 6, lines
`
`17-30).
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 5
`
`It would have been obvious to a person of ordinary skill in the art at the time of
`
`the invention to have frequency converters in order to gain the benefit of including the
`
`common components necessary to operate the device.
`
`As per claim 2, Beer as modified by Margomenos discloses the antenna-
`
`integrated module according to Claim 1, wherein at least one of (i) the one or more first
`
`antenna elements and (ii) the one or more second antenna elements has a differential
`
`configuration (Beer, Fig. 2, item 50 showing the dipoles in a differential configuration).
`
`As per claim 3, Beer as modified by Margomenos further discloses the antenna-
`
`integrated module according to Claim 1, wherein the insulating layer is stacked on a first
`
`surface of a conductor plate (Beer, 1185 where the apparatus, including the insulating
`
`layer is stacked on a metal plate).
`
`As per claim 4, Beer as modified by Margomenos further discloses the antenna-
`
`integrated module according to Claim 1, wherein the one or more first antenna elements
`
`and the one or more second antenna elements are configured such that the one or
`
`more first antenna elements and the one or more second antenna elements radiate
`
`toward a second surface of the re-distribution layer (Beer, Fig. 1A, item 50 showing the
`
`antennas radiating in the direction of re-distribution layer, item 61).
`
`As per claim 5, Beer as modified by Margomenos further discloses the antenna-
`
`integrated module according to Claim 1, wherein the one or more semiconductor chips
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 6
`
`each have one or more phase adjusting circuits that are connected to the one or more
`
`frequency converters (Margomenos, Col. 6, lines 17-30).
`
`It would have been obvious to a person of ordinary skill in the art at the time of
`
`the invention to have phase adjusting circuits in order to gain the benefit of including the
`
`common components necessary to operate the device.
`
`As per claim 6, Beer as modified by Margomenos further discloses the antenna-
`
`integrated module according to Claim 1, wherein the one or more semiconductor chips
`
`each have one or more amplitude adjusting circuits that are connected to the one or
`
`more frequency converters (Margomenos, Col. 6, lines 17-30).
`
`It would have been obvious to a person of ordinary skill in the art at the time of
`
`the invention to have amplitude adjusting circuits in order to gain the benefit of including
`
`the common components necessary to operate the device.
`
`As per claim 7, Beer as modified by Margomenos further discloses the antenna-
`
`integrated module according to Claim 1, wherein the semiconductor chips are disposed
`
`separately from each other; and the one or more second antenna elements are
`
`disposed between the semiconductor chips (Beer, Fig. 9, items 10A and 103).
`
`It would have been obvious to a person of ordinary skill in the art at the time of
`
`the invention to have the second antenna elements between the chips as it has been
`
`held that rearranging parts of an invention involves only routine skill in the art.
`
`In re
`
`Japikse, 86 USPQ 70.
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 7
`
`As per claim 8, Beer as modified by Margomenos further discloses a radar
`
`device comprising:
`
`an antenna-integrated module (Beer,118); and a second substrate on which the
`
`antenna-integrated module is mounted (Beer, 1100 where the package is mounted to
`
`another substrate).
`
`As per the limitations of the antenna-integrated module, please see the rejection
`
`and rationale of claim 1 above.
`
`As per claim 9, Beer as modified by Margomenos further discloses the radar
`
`device according to Claim 8, wherein the insulating layer is stacked on a first surface of
`
`a conductor plate; and the second substrate has a third conductor pattern in a portion of
`
`the second substrate other than a portion facing the one or more first antenna elements
`
`and the one or more second antenna elements of the antenna-integrated module (Beer,
`
`11121-123 where multiple antennas and associated conductor patterns are disclosed).
`
`As per claim 10, Beer as modified by Margomenos further discloses the radar
`
`device according to Claim 8, wherein the second substrate has a forth conductor pattern
`
`that is located in a portion facing the first antenna element and the second antenna
`
`element of the antenna-integrated module and the second substrate has a reflection
`
`plate that is located between the antenna-integrated module and the conductor pattern
`
`in a portion facing the first antenna element and the second antenna element (Beer,
`
`1121-123 and 1147 disclosing the reflector).
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 8
`
`As per the limitations of claims 11 and 12, please see the rejection and rationale
`
`of claims 5 and 6 above.
`
`Conclusion
`
`8.
`
`The prior art made of record and not relied upon is considered pertinent to
`
`applicant's disclosure and is provided on form PTO-892.
`
`9.
`
`Any inquiry concerning this communication or earlier communications from the
`
`examiner should be directed to MARCUS E WINDRICH whose telephone number is
`
`(571)272-6417. The examiner can normally be reached on M-F ~7-3:30.
`
`Examiner interviews are available via telephone, in-person, and video
`
`conferencing using a USPTO supplied web-based collaboration tool. To schedule an
`
`interview, applicant is encouraged to use the USPTO Automated Interview Request
`
`(AIR) at http://www.uspto.gov/interviewpractice.
`
`If attempts to reach the examiner by telephone are unsuccessful, the examiner’s
`
`supervisor, Jack Keith can be reached on 5712726878. The fax phone number for the
`
`organization where this application or proceeding is assigned is 571 -273-8300.
`
`Information regarding the status of an application may be obtained from the
`
`Patent Application Information Retrieval (PAIR) system. Status information for
`
`published applications may be obtained from either Private PAIR or Public PAIR.
`
`Status information for unpublished applications is available through Private PAIR only.
`
`For more information about the PAIR system, see http://pair-direct.uspto.gov. Should
`
`you have questions on access to the Private PAIR system, contact the Electronic
`
`Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a
`
`

`

`Application/Control Number: 15/046,933
`Art Unit: 3646
`
`Page 9
`
`USPTO Customer Service Representative or access to the automated information
`
`system, call 800-786-9199 (IN USA OR CANADA) or 571 -272-1 000.
`
`/MARCUS E WINDRICH/
`
`Primary Examiner, Art Unit 3646
`
`