`
`UNITED STATES PATENT AND TRADEMARK OFFICE
`
`UNITED STATES DEPARTMENT OF COMMERCE
`United States Patent and Trademark Office
`Address: COMIVHSSIONER FOR PATENTS
`PO. Box 1450
`Alexandria1 Virginia 22313-1450
`www.uspto.gov
`
`
`
`
`
`15/052,224
`
`02/24/2016
`
`Takahiro NAGAMI
`
`1497—503 02CX2
`
`5891
`
`TYPHA IP LLC
`1819 L Street NW Suite 200
`
`Washington, DC 20036
`
`NGUYEN, HOAN C
`
`ART UNIT
`
`2871
`
`MAIL DATE
`
`05/18/2017
`
`PAPER NUIVIBER
`
`DELIVERY MODE
`
`PAPER
`
`Please find below and/or attached an Office communication concerning this application or proceeding.
`
`The time period for reply, if any, is set in the attached communication.
`
`PTOL—90A (Rev. 04/07)
`
`

`

`
`
`Applicant(s)
`Application No.
` 15/052,224 NAGAMI, TAKAHIRO
`
`Examiner
`Art Unit
`AIA (First Inventorto File)
`Office Action Summary
`
`2871HOAN c. NGUYEN first“
`
`-- The MAILING DA TE of this communication appears on the cover sheet with the correspondence address --
`Period for Reply
`
`A SHORTENED STATUTORY PERIOD FOR REPLY IS SET TO EXPIRE g MONTHS FROM THE MAILING DATE OF
`THIS COMMUNICATION.
`Extensions of time may be available under the provisions of 37 CFR 1.136(a).
`after SIX (6) MONTHS from the mailing date of this communication.
`If NO period for reply is specified above, the maximum statutory period will apply and will expire SIX (6) MONTHS from the mailing date of this communication.
`Failure to reply within the set or extended period for reply will, by statute, cause the application to become ABANDONED (35 U.S.C. § 133).
`Any reply received by the Office later than three months after the mailing date of this communication, even if timely filed, may reduce any
`earned patent term adjustment. See 37 CFR 1.704(b).
`
`In no event, however, may a reply be timely filed
`
`-
`-
`
`Status
`
`1)IXI Responsive to communication(s) filed on 03/28/2017.
`[I A declaration(s)/affidavit(s) under 37 CFR 1.130(b) was/were filed on
`
`2b)|:| This action is non-final.
`2a)IZ| This action is FINAL.
`3)I:I An election was made by the applicant in response to a restriction requirement set forth during the interview on
`
`
`; the restriction requirement and election have been incorporated into this action.
`
`4)|:I Since this application is in condition for allowance except for formal matters, prosecution as to the merits is
`closed in accordance with the practice under EX parte Quay/e, 1935 CD. 11, 453 O.G. 213.
`
`3) D Interview Summary (PT0_413)
`1) D Notice of References Cited (PTO-892)
`Paper No(s)/Mai| Date.
`.
`.
`—
`4) I:I Other'
`2) D Information Disclosure Statement(s) (PTO/SB/08a and/or PTO/SB/08b)
`
`Paper No(s)/Mai| Date .
`U.S. Patent and Trademark Office
`PTOL-326 (Rev. 11-13)
`
`Office Action Summary
`
`Part of Paper No./Mai| Date 20170508
`
`Disposition of Claims*
`5)|XI CIaim(s)1-_17is/are pending in the application.
`5a) Of the above claim(s) 8-_17is/are withdrawn from consideration.
`6 III Claim s) _ is/are allowed.
`s L7 is/are rejected.
`
`is/are objected to.
`
`) )
`
`_
`
`
`are subject to restriction and/or election requirement.
`9)|:l Claim(s
`)
`* If any claims have been determined allowable, you may be eligible to benefit from the Patent Prosecution Highway program at a
`
`participating intellectual property office for the corresponding application. For more information, please see
`htt
`://www.usoto. ov/ atents/init events"
`h/index.‘s
`
`
`
`
`
`or send an inquiry to PF"I-Ifeedback{<‘buspto.qov.
`
`Application Papers
`
`10)I:I The specification is objected to by the Examiner.
`11)|:I The drawing(s) filed on _ is/are: a)I:I accepted or b)I:I objected to by the Examiner.
`Applicant may not request that any objection to the drawing(s) be held in abeyance. See 37 CFR 1.85(a).
`
`Replacement drawing sheet(s) including the correction is required if the drawing(s) is objected to. See 37 CFR 1.121 (d).
`
`Priority under 35 U.S.C. § 119
`12)I:I Acknowledgment is made of a claim for foreign priority under 35 U.S.C. § 119(a)-(d) or (f).
`Certified copies:
`
`b)I:I Some” c)I:I None of the:
`a)I:I All
`1.I:I Certified copies of the priority documents have been received.
`2.I:I Certified copies of the priority documents have been received in Application No.
`3.I:I Copies of the certified copies of the priority documents have been received in this National Stage
`
`application from the International Bureau (PCT Rule 17.2(a)).
`** See the attached detailed Office action for a list of the certified copies not received.
`
`Attachment(s)
`
`
`
`

`

`Application/Control Number: 15/052,224
`
`Page 2
`
`Art Unit: 2871
`
`DETAILED ACTION
`
`The present application is being examined under the pre-AIA first to invent provisions.
`
`This instant application 15/052224 is continuation of 13/749161 that is continuation of
`
`12/637856.
`
`Drawings
`
`The drawings are objected to under 37 CFR 1.83(a). The drawings must show
`
`every feature of the invention specified in the claims. Therefore, the feature of “Q
`
`inorganic film 107 on the organic film 108” in claim 1 must be shown or the feature(s)
`
`canceled from the claim(s). No new matter should be entered.
`
`Corrected drawing sheets in compliance with 37 CFR 1.121 (d) are required in
`
`reply to the Office action to avoid abandonment of the application. Any amended
`
`replacement drawing sheet should include all of the figures appearing on the immediate
`
`prior version of the sheet, even if only one figure is being amended. The figure or figure
`
`number of an amended drawing should not be labeled as “amended.” If a drawing figure
`
`is to be canceled, the appropriate figure must be removed from the replacement sheet,
`
`and where necessary, the remaining figures must be renumbered and appropriate
`
`changes made to the brief description of the several views of the drawings for
`
`consistency. Additional replacement sheets may be necessary to show the renumbering
`
`of the remaining figures. Each drawing sheet submitted after the filing date of an
`
`application must be labeled in the top margin as either “Replacement Sheet” or “New
`
`Sheet” pursuant to 37 CFR 1.121(d). If the changes are not accepted by the examiner,
`
`

`

`Application/Control Number: 15/052,224
`
`Page 3
`
`Art Unit: 2871
`
`the applicant will be notified and informed of any required corrective action in the next
`
`Office action. The objection to the drawings will not be held in abeyance.
`
`Claim Rejections - 35 USC § 1 12
`
`The following is a quotation of the first paragraph of 35 U.S.C. 112(a):
`
`IN GENERAL—The specification shall contain a written description of the
`(a)
`invention, and of the manner and process of making and using it, in such full, clear, concise,
`and exact terms as to enable any person skilled in the art to which it pertains, or with which it
`is most nearly connected, to make and use the same, and shall set forth the best mode
`contemplated by the inventor orjoint inventor of carrying out the invention.
`
`The following is a quotation of the first paragraph of pre-AIA 35 U.S.C. 112:
`
`The specification shall contain a written description of the invention, and of the
`manner and process of making and using it, in such full, clear, concise, and exact terms as to
`enable any person skilled in the art to which it pertains, or with which it is most nearly
`connected, to make and use the same, and shall set forth the best mode contemplated by the
`inventor of carrying out his invention.
`
`Claims 1-7 are rejected under 35 U.S.C. 112(a) or 35 U.S.C. 112 (pre-AIA), first
`
`paragraph, as failing to comply with the written description requirement. The claim(s)
`
`contains subject matter which was not described in the specification in such a way as to
`
`reasonably convey to one skilled in the relevant art that the inventor or a joint inventor,
`
`or for pre-AIA the inventor(s), at the time the application was filed, had possession of
`
`the claimed invention.
`
`Claim 1 cites “an inorganic film on the organic film”. However, the instant application
`
`15/052224 disclose only “an organic passivation film 108 is formed on inorganic
`
`passivation film 107” as Figs. 2-9 shown. There is no “an inorganic film 107% the
`
`organic film 108”. This is not disclose in the parent application and instant application.
`
`

`

`Application/Control Number: 15/052,224
`
`Page 4
`
`Art Unit: 2871
`
`Applicant should file this application as Continuation In Part (CIP) for this instant
`
`application due to new matter, which do not disclose before in the parent cases.
`
`Conclusion
`
`Applicant's amendment necessitated the new ground(s) of rejection presented in
`
`this Office action. Accordingly, THIS ACTION IS MADE FINAL. See MPEP
`
`§ 706.07(a). Applicant is reminded of the extension of time policy as set forth in 37
`
`CFR1.136(a).
`
`A shortened statutory period for reply to this final action is set to expire THREE
`
`MONTHS from the mailing date of this action.
`
`In the event a first reply is filed within
`
`TWO MONTHS of the mailing date of this final action and the advisory action is not
`
`mailed until after the end of the THREE-MONTH shortened statutory period, then the
`
`shortened statutory period will expire on the date the advisory action is mailed, and any
`
`extension fee pursuant to 37 CFR 1.136(a) will be calculated from the mailing date of
`
`the advisory action.
`
`In no event, however, will the statutory period for reply expire later
`
`than SIX MONTHS from the date of this final action.
`
`Any inquiry concerning this communication or earlier communications from the
`
`examiner should be directed to HOAN C. NGUYEN whose telephone number is
`
`(571)272-2296. The examiner can normally be reached on MONDAY-
`
`THURSDAY:8:OOAM-4:30PM.
`
`Examiner interviews are available via telephone, in-person, and video
`
`conferencing using a USPTO supplied web-based collaboration tool. To schedule an
`
`

`

`Application/Control Number: 15/052,224
`
`Page 5
`
`Art Unit: 2871
`
`interview, applicant is encouraged to use the USPTO Automated Interview Request
`
`(AIR) at http://www.uspto.gov/interviewpractice.
`
`If attempts to reach the examiner by telephone are unsuccessful, the examiner’s
`
`supervisor, Edward Glick can be reached on (571) 272-2490. The fax phone number
`
`for the organization where this application or proceeding is assigned is 571 -273-8300.
`
`Information regarding the status of an application may be obtained from the
`
`Patent Application Information Retrieval (PAIR) system. Status information for
`
`published applications may be obtained from either Private PAIR or Public PAIR.
`
`Status information for unpublished applications is available through Private PAIR only.
`
`For more information about the PAIR system, see http://pair-direct.uspto.gov. Should
`
`you have questions on access to the Private PAIR system, contact the Electronic
`
`Business Center (EBC) at 866-217-9197 (toll-free). If you would like assistance from a
`
`USPTO Customer Service Representative or access to the automated information
`
`system, call 800-786-9199 (IN USA OR CANADA) or 571-272-1000.
`
`/HOAN C NGUYEN/
`
`Primary Examiner, Art Unit 2871
`
`